A revolver is a simpler machine than a semi-auto, there are less things that can go wrong. Cleaning a revolver means cleaning one long barrel and five or six chambers in the cylinder.
Clean Your Oft-Used Guns After Every Use
As a general rule, it’s a good idea to clean your gun after every trip to the shooting range. Defensive firearms that don’t get used very frequently should also be cleaned on occasion. Try to give them a deep clean and inspection about once a month.
They leave behind remnants of carbon from the gunpowder, as well as trace amounts of lead and copper. The residual fouling can build up in the barrel, affecting your precision and potentially your handgun’s reliability. Failure to fire: Failure to fire is a common issue with guns that don’t see regular cleaning.
Your gun should always be clean to give you confidence in its reliability. We recommend you clean your carry gun at a 2-week interval and ensure that whenever you hit the shooting range with it, you would have cleaned it by the time you slip it back in its holster and carry it around.
Be sure you oil the barrel and the cylinders completely. With the oil drop a couple drops into the hammer housing and also along the extractor rod inside the cylinder, any moving part should receive some oil.
The main benefit of revolvers is on the larger end. In short, the simplicity of revolvers and the robustness of their parts allows them to shoot larger calibers. Revolvers are heavy, and can generally be made to withstand more force. You can find some obscure semi-autos that shoot incredibly large rounds, like the .
A gun can typically go about 6 months without cleaning if it is not being used regularly. If you use it frequently you will need to make a judgment call. Of course, anytime there is any potential for moisture coming in contact with the gun you should clean it before storing it away.
No, it’s really not. Don’t ever do that! There’s at least a little “break-in” on any firearm—some more so than others. This gun shipped with a copper-based paste lube already in place.
In humid or salty conditions, a cleaning maintenance at least once a quarter is recommended. Also remember—metal dries out no matter what the conditions. A good oil wipe down once a month can never hurt — and, will make your gun happy and shiny. Check out Blue Wonder Gun Cleaner.
Since WD-40 is primarily a solvent it seems to make sense that it would be ideal for cleaning guns. However, cleaning your guns with WD40 is NOT advisable. … Using an aerosol solvent simply “shoots” all the gunk into tiny crevices in your firearm, making them even harder to clean and can lead to “gumming” up.
Rubbing alcohol works well as a solvent
Alcohol is a solvent that’s great for general gun cleaning. It’ll also displace water anywhere on or in a firearm and quickly evaporate. … Make sure to use oil afterwards, as the alcohol will strip all oils off your weapon when used as a degreaser or solvent.
Much like oil, too much is of no value and can actually be a detriment. When applying grease, rub it into the surfaces to be treated and wipe off any visible excess. Both oil and grease will degrade over time, meaning periodic reapplication would be a good idea.
Be sure to keep your fingers away from the front of the trigger area. The slide and hammer of a semi-automatic gun can deliver a bruising blow when held too close to the body. All handguns should be fired at arm’s length.
Clean your firearms after every use to keep them in top condition. This will help ensure that the action functions safely and properly and the ammunition performs as it should.
Field stripping is not necessary to clean the gun thoroughly. Don’t take apart your gun more than you have to unless it requires repair. Likewise, some guns can’t be stripped at all and it won’t be necessary to do anything but open the chamber to clean it.
Revolvers are often shown to be more “powerful” than semiautomatic handguns, and this is true to some extent: revolvers can utilize much more powerful ammunition (see page pic) because they usually have a solid frame and therefore are physically stronger.
Do not lubricate the bore using gun oil! For long term storage only, the bore can be treated with a heavier lubricant such as Barricade (or equivalent). This must be removed by cleaning the barrel prior to shooting the firearm!
A safe will give your gun a layer of protection from the elements, theft and little ones’ hands. Storing your gun in a safe is the first step to prevent rust, but you also need to consider the temperature and moisture control of the environment around the safe. We suggest storing your firearm in your home if you can.
If you’re going to trust your life with a handgun, you’ll want to run several hundred rounds through it before you can truly rely on it. Most will agree at least 200 is the right number to break in with, and this can be done with bulk ammo.
This will be your gun’s first cleaning and you should ALWAYS give it a good cleaning before you ever try shooting it. In talking with a local gunsmith, about 85% or more of the guns that come into his shop for reliability problems are because the gun is filthy.
Refer to your owner’s manual for the proper lubrication points, as well as the proper amounts of lubrication required. Your GLOCK pistol should be cleaned and lubricated: When it’s brand new, before it’s fired for the first time. After each time it’s fired.
gun cleaning kit
how to clean a stainless steel revolver
revolver cleaning kit 357
parts of a revolver
how to clean a shotgun