Use 99% or 90% isopropyl rubbing alcohol for the best results. You can put rubbing alcohol directly on a paper towel or tissue and rub that on the old marks. Many hand sanitizers contain rubbing alcohol. Rub them directly on the old marks and wipe off of the board.
Rubbing alcohol, hand sanitizer, nail polish remover containing acetone, vinegar, and Windex are all safe to use on a whiteboard. To clean the whiteboard, dampen a cloth and use it to rub in the cleaning product of your choice. Rinse the cloth with cold water and use it to rinse off any remaining cleaning solution.
Use water or common household glass cleaners.
Yes, products such as Windex® are recommended for cleaning a whiteboard. Never use scouring pads or abrasive cleaners, as those can ruin the dry erase surface and allow ink penetration.
To put it simply, alcohol destroys the lubricating layer of your dry erase board. Yes, your whiteboard will look spotless, but after continued use, your whiteboard will eventually lose the ability to wipe clean.
But for hand sanitizer to work effectively to clean whiteboards, they need a much higher concentration of isopropyl alcohol – the 90% to 99% range is best. Apply hand sanitizer directly to the whiteboard, using a soft, clean cloth or paper towel to wipe it over the entire surface of the whiteboard.
How to remove Washable Dry Erase Markers from chalkboard – slate or green. Wipe all stains with a damp sponge. If any stain remains, apply Soft Scrub with a damp sponge, work in a circular motion and rinse. If stain remains, saturate a cotton ball with rubbing alcohol, blot the stain and rinse.
Never use Acetone (propanone) or ethanol to clean the Whiteboard. Not only is it dangerous from a Health and Safety point of view to your own health but also, the acetone will strip the varnish off the board.
Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth. Abrasives or other chemical cleansers should not be used.
Contrary to it’s name, the permanent marker is not so permanent on a dry erase board with lines. In fact, if you ever find yourself in a situation where you’ve had a moment of inspiration, picked up a Sharpie and went to town on the whiteboard… do not panic!
Clean Your Whiteboards Erasers. If you decide to use a felt eraser instead of the recommended microfiber cloths to clean your whiteboard painted wall, be sure to remove all of the built-up marker dust from the eraser beforehand. When whiteboard erasers become overloaded with ink, they can no longer erase efficiently.
You can add one teaspoon of vinegar per cup of water; use a microfiber cloth to clean the whiteboard. Paper Towel and Water: This is a quick, chemical-free way to clean the surface of your board, but may not remove old stains or ghosting.
Isopropanol. Isopropanol, also known as isopropyl alcohol, is another chemical found in dry-erase markers. Isopropyl alcohol (IPA) is a solvent–a chemical that dissolves other substances and mixes with other solvents easily.
Water (CAS# 7732-18-5), Denatured alcohol (CAS# 64-17-5), Cocamidopropyl betaine (CAS# 61789-40-0), Potassium sorbate (CAS# 579-00-1), Citric acid (CAS# 77-92-9).
Paint Marker, Chalk Ink, Chalk Pen, Bistro Marker, Paint Pen, Craft Marker, Poster Marker, Glass Pen, Liquid Chalk and of course Chalk Marker.
When it comes to whiteboard vs. dry erase board, the truth is that they are the same material. The materials they’re typically made of include melamine, porcelain and glass.
Dry erase boards can be painted for a new look. Don’t throw out your worn or chipped dry erase boards. With a little time and a few supplies, your dry erase board can function like new again.
You have a few options for making lines on the white board. Colored tape won’t cause damage to the board and is removable if you decide you want to change the lines. Electrical or washi tape are two options that shouldn’t damage the surface. If you’re sure you want the lines to stay, use permanent marker or paint.
Any marker left on for more than 24 hours is at risk to leave “ghost” marks. Very stubborn stains can be removed with a little propyl alcohol. Wipe and dry it off after applying — don’t let it dry on the board.
When not in use, EXPO markers stored horizontally with caps installed tightly will last approximately 2-3 years. Yes, depending on the extent of solvent loss, the markers can often be restored. Place the cap back on the marker tightly and store tip down for 24 hours. The marker should revive.
Found in most “Office Supply” Stores, this spray makes cleaning whiteboards a snap. Wipe with baby wipes or disinfectant wipes. The key is that you must use a soft cloth to dry the board thoroughly after wiping. (Do not use a tissue that has hand softener in it – it will leave a residue on the Whiteboard.)
Using baby wipes to clean a dry erase board.
I took my son’s baby wipes to the dry erase board in his room (don’t ask), and the old marks came right up with no problem. Simply take a baby wipe and rub it vigorously over the soiled area.
Simply mix one part water and one part alcohol in a spray bottle, squirt some on the board and rinse with a soft, damp cloth. If you need a little extra cleaning power, use the alcohol at full potency rather than diluting it with water.
how to remove old dry erase marker from whiteboard
how to remove permanent marker from white board at home
how to remove whiteboard marker off clothes
how to remove dry erase marker from wall
permanent marker on dry erase board
how to clean a whiteboard that won’t erase
what not to use on a whiteboard
how to clean a whiteboard with toothpaste